Chinese | English

Xingtai far Tuo Auto Parts Manufacturing Co., Ltd., to provide customers with quality products and services!
News Center
Your current location:Home > News information > News Center

How self inspection shaft
发布时间:2014.11.14 新闻来源:邢台远拓汽车零部件制造有限公司

The car needs to understand the car, just keep the car status, to detect the car "minor", to prevent Many a little make a mickle., "small problems" into "the big question". Here, to introduce to you the owner is the health question how self drive shaft.

The drive shaft for driving the car inspection and warranty does not vary as method. For a rear wheel drive car, the transmission shaft is two not constant velocity universal joint. If you relax in the clutch when starting, or sudden acceleration, sharp deceleration underbody efferent clicking sound, marked not CV joint needs to be replaced. Another method is to check, left and right under the car caught the drive shaft swing, if change the angle of over 45 degrees, is marked not CV joint space is too large, need to be repaired.

The transmission shaft front wheel drive car with CV joint, sealed with rubber sleeve on the joint part, the owner is necessary to often check the rubber sleeve status. Because once damaged, sand will be on a trek when run into the cardan joint, accelerated wear, short life.

However, check the rubber sleeve is not split is relatively simple. If near the rim and engine floor found extremely viscous oil, dynamic or on a trek hit the steering wheel when eventually will have clap, cardan joints are marked is damaged, should be replaced.

本文共分 [1]. ....页


Mobile station


WeChat