(1) of the drive shaft and the locking check.

Bolt drive shaft of the connecting parts of positive and negative, due to withstand the torque, easy to cause loose. Therefore, you should always check and locking in the use process.

Check the cross axle is loose. Park the vehicle on the flat field, and hid in the triangle wood wheel; loosen parking brake and transmission in neutral, then hands clenched on the transmission shaft tube, hard left turn sharply. There should be no obvious space, such as obvious loose, remove the check, replace if necessary.

Check the drive shaft fastening bolt. Apply the parking brake, check and tight fixing Cardan flange bolts; transmission hanging people first or reverse, loosen parking brake, turn the crankshaft so that the transmission shaft to rotate 180 degrees.

The fixed bolt inspection intermediate shaft bracket and frame, such as loose should be tightened.

(2) the lubrication of the transmission shaft.

Each driving a certain mileage car, should be to the shaft telescopic key tooth, keyway and center bearing grease according to regulations; universal joint needle roller bearing points to add gear oil, no decomposition can also grease.

(3) driving shaft universal joint fork mounting.

Install the drive shaft universal joint, if the arrow marking the drive shaft universal joint, should be positive if the arrow on, unmarked, should make both ends of the transmission shaft fork is arranged in the same plane, otherwise, jitter and abnormal sound transmission shaft will happen.

The above information is composed of a transmission shaft bracket manufacturers Xingtai YUANTUO Weiye trade limited company to provide.