Drive shaft balancing machine correction workpiece imbalance requirements exceed the balancing machine itself minimum residual unbalance capacity, that is, the balance precision of the troubleshooting can not meet the requirements of the balance of the workpiece.

After transmission shaft balancing machine of the vibration of the rotor will appear obvious in actual use, this is not caused by the unbalanced rotor itself, but due to the rotor axis neck into elliptical or rotor structure stiffness differences exist on the cause of higher harmonic, caused by the electromagnetic excitation vibration, with rotor blades, the influence of the spinning process middle angry vortex system resonance, etc.

The impact of power supply fluctuation and noise caused by frequent startup of other equipment connected to the power grid or the beat frequency interference caused by the close diameter of the supporting roller and rotor journal. The difference between the roller diameter and the workpiece journal size shall be greater than 20%.

The above information is provided by xingtai yuantuo auto parts manufacturing co., LTD. Company website: http://www.xtytwy.com