How to prevent the U type bracket fracture in the middle of the drive shaft?
发布时间：2016.02.20 新闻来源：邢台远拓汽车零部件制造有限公司
The U type support in the middle of the drive shaft has a certain elasticity, mainly one of which has a rubber pad. If the rubber mat is of poor quality, aging and contraction, it will produce voids and loosen, and a certain impact vibration will be added to the bracket under the middle support, which will make the U stent loose and crack easily. If the rubber mat is not clamped tightly and the bolt of the connecting frame is loose, it will cause the bolt to break at the hole. In addition, cracks in the middle support bracket, such as in the stamping and.L, are also broken due to stress concentration. In the middle of the transmission shaft, the U type support can cause the transmission shaft to fall off, and even lead to the serious mechanical accident. Therefore, in daily use, to strengthen the inspection, repair and maintenance should be carefully checked, to eliminate hidden dangers.
When the gap between the rubber pad and the U type bracket is filled, the metal band can be filled, and the U type bracket is cracked and should be repaired, repaired or replaced immediately, and the connecting bolts should be loosened in time.
