Three factors to consider when buying a drive shaft balancing machine
发布时间：2016.05.11 新闻来源：邢台远拓汽车零部件制造有限公司
When you want to buy a drive shaft balancing machine, you may be puzzled by the various balancing machines in the market and the difference in the price of the balancer. Even if you've used years of balancing machines, you don't necessarily know the real difference. If you only listen to the introduction of the manufacturer, you may spend a high price to buy a balance machine that is not suitable for you. The following small series on the user often asked a few questions, make some brief introduction, for your reference when you buy.
The machine is used for the determination of instrument unbalance, according to the measurement results of correction, to improve the quality of the distribution by balancing of the rotor, the rotor vibration or when the shaft on the bearing is reduced to the specified range. The following will introduce you should how to use the tire balancing machine. To the appropriate pressure, remove the lead on the rim, the tire ditch stone removed and clean, clean the rim.
The tire is arranged on the installation face balance shaft, choose the right vertebral body with the locking device of the tire lock (vertebral always at the center hole. Otherwise it will tire rotation data are not allowed). To balance one side position all lights (different models show a different way) lead at the highest point on the rim one side is 12 points in the corresponding number of grams, so is the other side. Repeat after 4 steps, until the balance machine showed 0 (5 grams or less, because there is no lead, 5 grams of balancing machine does not show the following 5 grams of unbalance). The dynamic balance is over, take off tire.
Open the balance power supply, pull out the ruler, measure the distance of the wheel rim, the distance from the balancer, the width of the rim, the diameter of the rim, and enter the measured data in turn
Press the start button, the balance of the machine began to drive the tire rotation, measuring start, be careful not to stand near the tires, so as not to risk
