Brief description of daily maintenance of truck transmission shaft
发布时间：2017.01.03 新闻来源：邢台远拓汽车零部件制造有限公司
1. do not use high-grade starting and screw up the clutch pedal, excessive collision can damage the transmission mechanism, including the drive shaft.
2. vehicle overloading, speeding. Vehicles will have its approved carrying capacity, excessive overloading, beyond the mechanical capacity, will exacerbate the damage to the parts.
3. check the working conditions of the drive shaft regularly. Check the transmission shaft of the vehicle before and after the bus stop. We can refer to the "car needs careful maintenance, daily should be" three check four check ".
4., often check the drive shaft hanger fastening situation, support rubber is damaged, the drive shaft of the connecting parts are loose, whether the transmission shaft deformation.
5. in order to ensure the dynamic balance of drive shaft, should always pay attention to the balance sheet or desoldering welding. Driving shaft assembly is provided, in driving axle loading should be paid attention to when the telescopic sleeve assembly mark, should ensure that the forks in a plane. When the drive shaft is removed, the assembly mark shall be printed on the expansion sleeve and the flange shaft so as to keep the original distribution unchanged during the reassembly.
6. grease shall be added to the universal cross bearing all the time. The No. 3 lithium base grease shall be injected in summer and the No. 2 lithium base grease shall be injected in winter. Grease, please refer to the "butter" do not mess with the grease classification and use.
