What is the function of the center hanger of the drive shaft?
发布时间：2017.06.21 新闻来源：邢台远拓汽车零部件制造有限公司
The transmission shaft of a small car is in short distance from the driving gear shaft of the rear axle reducer, and is connected with a set of drive shaft assembly, and the drive shaft center hanger is not provided. The distance between the drive shaft and the driven shaft of the truck is far from the driven shaft, so the center of the drive shaft is connected. Therefore, the center hanger is adopted. Usually, the center hanger is located in or under the crossbeam of the frame. Some of the hangers are bolted into the crossbeam and some are hoisted under the beam. The hanger is provided with two sets of ball bearings and a bearing seat, and a rubber ring with different shapes is attached between the bearing seat and the hanger seat hole. The rear end of the front axle is positioned by the center hanger, and the center hanger ensures the front and rear transmission shafts to rotate at the same time, while the front axle can swing slightly and axially.
