Do you really care for the car transmission shaft?
发布时间：2017.07.04 新闻来源：邢台远拓汽车零部件制造有限公司
Automotive transmission shaft maintenance key points:
When the automobile is maintained, the transmission shaft should be injected back into the grease and fasten the drive shaft to connect the bolt. This work is very important to the new car running in period.
1, the drive shaft before use, must be in the universal joint, intermediate support and sliding spline and other oil filling place to fill the car special grease.
2, in the car every 7 days or 2000 kilometers must be on the universal joint, intermediate support and sliding spline lubrication situation check, such as lubrication is not good, should be filled with car special grease. The summer should fill No. 3 winter 2 injection of lithium based grease.
3, prohibit the use of high speed gear starting, screw up the clutch pedal, overloading, speeding and other irregularities.
4, because of the transmission shaft fastening bolts in heavy load transmission environment easily cause loosening and fall off, so the transmission shaft maintenance is mainly to tighten the connecting bolts and filling grease. The drive shaft universal joint, intermediate support, sliding spline and other parts of special lubricating grease filling the car, to put the fuel nozzle clean, smooth, the blockage or deformation of the nozzle should be replaced with new oil is oil spill prevail. Check all the bolts and nuts of the drive shaft, especially the studs, the connecting bolts and the bolts of the middle support bracket, etc., should be tightened at the required moment.
