The drive shaft support plays an important role
发布时间：2022.10.17 新闻来源：邢台远拓汽车零部件制造有限公司
The transmission shaft bracket has its necessary role in use. This article introduces it to you to help you solve the problems you don't understand in use.
Generally, the distance between the transmission main shaft and the driving gear shaft of the rear axle reducer of small cars is short, so a set of transmission shaft assembly is used to connect, and no transmission shaft bracket is set. The distance between the drive shaft and driven shaft of the truck is far, and the drive shaft has a joint part, so the center hanger is used. Generally, the center hanger is located in or under the beam in the frame. Some hangers are installed in the beam with bolts, and some hangers are hoisted under the beam.
The transmission shaft bracket has two sets of ball bearings and a bearing seat, which are attached between the periphery of the bearing seat and the hanger seat hole with rubber ring pads of different shapes. The rear end of the front transmission shaft is positioned by the center hanger. The transmission shaft bracket can ensure the positioning and rotation of the front and rear transmission shafts. At the same time, the front transmission shaft can have micro swing and axial micro play.
